> On Sun, 24 Dec 2006 05:24:07 +0000, Toyota wrote:
> > I've searched the Net and haven't found any info on how to adjust the
> > headlights on a 2001 Highlander. There are no visable screws to turn. I do
> > see "up - down" and "left - right" on the top of both lamps but no opening
> > to adjust them?!? Anyone know where the adjusting screws are? tia
> Look down...you should see a grey colored bolt with a large serrated
> washer around it. But, IIRC, the adjustments are BACKWARDS from the
> markinks, ie. the markings indicate the direction the BOTTOM of the washer
> should go.
Are you talking abot the area almost inside the fenderwell to the far
right or left of the individual light, at the back of the light? I did
turn the one screw on each light I found there, no movement at all.
Don't know what they are for.
But no plastic caps, screws, bolts or anything else up front! Just the
black plastic that makes up the back of the light housing connecting at
the "lip" to the clear lens up front. On the lip are the arrows and
left/right, up/down, but no holes just solid plastic. I'm wondering if
one actually has to remove the lens to find the screws. Probably will
have to take it to a dealer, just to have the lights adjusted so I can
see in front of the car, not a quarter mile away where the light now
illuminates. >> Stay informed about: Highlander headlight adjustment